Outerimpact Ruger 10/22 Red Dot Sight Adapter Review

Reddish Dots on Rugers: Review of the OuterImpact Adapter Plate

We all have one; that project gun that sits in the dorsum of the safe. In my case information technology'south a Ruger 22/45 purchased more than a decade ago–well before options like Picatinny tiptop rails, threaded barrels, or lower accessory runway were standard factory options. Over the years small-scale changes have been made: the bull butt chopped and threaded, the loaded bedchamber indicator rendered inoperable, the silly fundamental locking mechanism removed, the magazine condom thrown in the trash, the barrel drilled and tapped for a lower rail.

Already existence a fan of the handgun with a red dot, I decided to likewise run that route with the 22/45. For the optic itself I settled on a Trijicon RMR. While i certainly doesn't require something so robust for a rimfire, some added durability never hurt annihilation–with added bonus points for being the same optic as my behave gun.

The initial 'piece of cake button' would be to only install a Picatinny rails and use a low mountain. However, ideally I wanted the lowest height over diameter as possible so I began seeking out an optic specific mountain. Easily establish were mounts for the Docter Optic, which of course would cover other micro cherry-red dots that apply the same mounting footprint. Only still no RMR. Then I came across a company absolutely I'd never heard of: OuterImpact.

From what I tin gather, OuterImpact was stood up last year and began manufacturing mounts. Their first production was an extended Picatinny rail for a 10/22. From in that location they moved on to brand a small-scale handful of mounts for guns such as Howa, Cruel, and Remington. What piqued my interest was their red dot adapter plate for the Ruger Marker I/II/III and the 22/45. With this ane directly-attach adapter you can mount more than ten micro carmine dot sights. Strike Industries makes something like for a Glock, just I hadn't seen the aforementioned detail for a Ruger. At an asking cost of $xl, I thought I'd give it a try.

A couple days subsequently the OuterImpact mount arrived in the post. I opened the package to find the plate, mounting screws, and a pair of sight alignment pins. For some optics you'll need to purchase different mounting screws for an additional $2. Giving the adapter plate a quick once over, I did notice that there were a lot of visible tool marks. But it's going on a gun that'south been scratched and beat up for over x years–pretty means very little in this instance.

I was less enthusiastic most the two raw holes drilled in the middle of the plate. In fact, fifty-fifty on the photos from the OuterImpact webpage, these holes don't exist.

Only when delving into the informational sheet did I discover what these new and unfinished arrivals are for: The C-More STS and Vortex Razor.

The lesser of the OuterImpact adapter plate perfectly matched the contour of my 22/45, and the holes lined up with OEM mounting locations. Installation was undramatic–just be sure to install the adapter plate with the correct orientation. The included torx screws were of the proper length to not over-penetrate. Ensure that y'all clean out your threads and use some kind of non-permanent thread locker.

After dropping in the alignment pins into the appropriate holes for your optic, your MRDS installs in the normal manner.

Exactly how this holds upward in the long term has however to exist seen, but I'thou non terribly concerned given that nosotros're talking about a suppressed .22lr for midnight bunny diggings and not a .50BMG. While perhaps the diameter axis could be lower (with an optic installed, your iron sights go dovetail protectors), information technology is an improvement over the Picatinny rail as you tin run into from the overlay below:

Those experienced with shooting ruby-red dots on handguns should take little upshot with obtaining the dot. Nosotros're not exactly talking a concealed carry weapon here regardless. The finish could be amend, and I tin only hope the raw holes were an oversight. For more information, you lot can find OuterImpact online hither.

Explore RECOILweb:

mclaughlinsplaccut.blogspot.com

Source: https://www.recoilweb.com/outerimpact-review-102151.html

Share this post